The tube lighting units iks aquastar luxus are made of aluminium and fitted with dimmable, electronic ballast units. They are available for the fluorescent tubes T5 and T8. In contrast to the tube lighting units from numerous other manufacturers that require an additional timer for switching off the tubes, iks aquastar luxus units can be operated from 0 to 100% power. This function is made possible by an extra, internally integrated electronic system. Dimming occurs via a low-voltage interface such as the one provided in the iks aquastar SIMMOD module. A switch allows the lighting to be set manually at any time to 100% for maintenance work for example. As you can see, as is so often the case, the decisive difference is in the little details.

The version iks aquastar lux is also equipped with electronic ballast units, but this unit is not dimmable.

Both models are of course waterproof, tested by the German TÜV and available in a variety of wattages.

Comfort:

Low weight and temperature

No flashing or flickering, not even during dimming and ignition

Electronic monitoring switches off faulty lamps

No bothersome humming noises

Efficiency:

Up to 25% lower power consumption

Up to 50% longer lamp life

dimensions

Type	Length standard	Length dimmable	Width	Height	Tube length
T8 2 x 18 W	715mm	715mm	160mm	60mm	675mm
T8 2 x 30 W	1015mm	1015mm	160mm	60mm	975mm
T8 2 x 36 W	1320mm	1320mm	160mm	60mm	1280mm
T8 1 x 58 W	1620mm	1620mm	130mm	60mm	1580mm
T8 2 x 58 W	1620mm	1620mm	160mm	60mm	1580mm
T5 2 x 24 W	645mm	660mm	160mm	60mm	590mm
T5 2 x 39 W	945mm	960mm	160mm	60mm	890mm
T5 1 x 54 W	1245mm	1260mm	130mm	60mm	1190mm
T5 2 x 54 W	1245mm	1260mm	160mm	60mm	1190mm
T5 1 x 80 W	1545mm	1560mm	130mm	60mm	1490mm
T5 2 x 80 W	1545mm	1560mm	160mm	60mm	1490mm